Identify whether an SEG fabric print is dye-sublimated or UV-printed before cleaning, because each type has its own safe care method.

It’s tempting to use one cleaning routine for every fabric graphic, but the wrong detergent or wash cycle can affect the print or leave the graphic fitting poorly in its frame. Dye-sublimated prints can be machine washed gently, while UV-printed fabric must only be spot cleaned. We’ll explain how to clean each type, what to look for in a detergent, and how to dry the fabric without putting its fit at risk.

  • Dye-sublimated SEG fabric can be machine washed on a delicate cycle with cold water and a gentle detergent such as Woolite.
  • UV printed SEG fabric cannot be machine washed; spot clean it with a damp cloth and a small amount of clear, mild soap.
  • Avoid harsh chemicals, scrubbing and soaking.
  • Never iron SEG fabric; wrinkles usually smooth out within a day once installed, and a fabric steamer handles persistent ones.

Can I wash my fabric SEG graphics if they get dirty?

How you clean a dirty SEG graphic depends on its print type. Clean it when dirt or marks appear; there’s no fixed cleaning schedule. Cleaning a banner is possible, but it removes the B1 fire retardant coating.

  1. Keep the Silicone Edge Attached

    Leave the sewn silicone edge attached while cleaning the graphic. It fits into the frame channel, so tugging it can strain the stitching. Handle the fabric gently, then let the graphic dry fully before reinstalling it.

  2. Clean Dye-Sublimated SEG Fabric Prints

    Dye-sublimated SEG fabric can be machine washed on a delicate cycle with cold water and a gentle detergent such as Woolite. Tumble dry it on low heat using a delicate setting, or have it dry cleaned.

  3. Clean UV Printed SEG Fabric

    UV printed SEG fabric cannot be machine washed. Spot clean it only, using a damp cloth with a small amount of clear, mild soap. Avoid scrubbing or soaking the fabric.

  4. Make sure the graphic is completely dry before reinstalling or packing it. For example, a graphic on a backlit counter display can be removed and cleaned without handling the whole display.

Chemical safety and detergent selection

Keep cleaning instructions for SEG fabric prints simple: use a soft cloth or sponge, cool water, and mild, non-bleach detergent. Avoid harsh chemicals and aggressive scrubbing, which are not part of the confirmed care method.

  1. Prepare a soft cloth or sponge and cool water. Add mild, non-bleach detergent for cleaning the fabric. Keep the supplies simple, and don’t substitute a stronger chemical cleaner when a mark looks stubborn.
  2. Work gently over the marked area with the cloth or sponge. Avoid forceful rubbing or scrubbing. A light touch keeps the cleaning action within the recommended method and helps prevent unnecessary friction against the printed surface.
  3. Use the same approach across the print rather than switching to a different stain treatment. Don’t apply bleach or harsh chemicals. For cleaning instructions for SEG fabric prints, the print’s appearance is not a reason to introduce an unapproved cleaner.
  4. After cleaning, let the graphic air-dry fully before reinstalling it. Don’t reinstall or pack it while damp. Follow the same sequence each time: gentle cleaning, then complete air-drying.
  5. Keep these cleaning instructions for SEG fabric prints with your display supplies, so the same mild method is easy to follow during event preparation. If you’re planning a wider display refresh, browse our display options alongside your cleaning supplies.

For laminated graphic film, cleaner pH should be 3.0 – 11.0; this guidance is separate from the mild, non-bleach method for SEG fabric.

Can SEG fabric prints be ironed or steamed to remove wrinkles?

  1. Install the SEG print and let its frame tension smooth minor wrinkles. Wrinkles typically smooth out within a day once the fabric is installed and stretched across the frame.
  2. Don’t iron SEG fabric. Direct heat can glaze or melt polyester fibers, leaving a shiny patch or damaging the print. Avoid pressing an iron against either the front or back, even through a cloth.
  3. Use a fabric steamer for persistent wrinkles. Hold the steamer 5 to 10 centimetres from the fabric and keep it moving. This distance helps release creases without pressing a hot surface onto the print.
  4. Fill the steamer with distilled water before treating the graphic. Test the steam on a hidden edge and inspect the printed area for changes. If the fabric becomes wet during steaming, move the appliance farther away to reduce the chance of steam spots.
  5. Steam only the wrinkled area, then let the fabric dry before packing or storing it. Avoid soaking the print. If a small crease remains, leave the graphic installed under frame tension rather than applying direct iron heat.

Use the same cautious approach if choosing a steam cleaner: fill it with distilled water, then test an inconspicuous section before treating the visible print. Check that the steam has not affected the print before continuing. Keep the iron away from the graphic; the guide advises against ironing fabric graphics because direct heat can glaze or melt polyester fibres. A steamer is the alternative, but patch-testing first remains important, and restraint with heat helps avoid changing the printed surface.

Mobile Light Box: Replacement SEG fabric graphics

We offer replacement SEG fabric graphics if a print remains stained, is damaged, or no longer suits your display. Because washing removes the fire retardant protection, we strongly recommend buying a new banner for long-term safety. Use spot cleaning only for short-term emergency situations.

Our replacement SEG fabric graphics give you an option for refreshing the fabric on your display. Consider replacement after cleaning and drying the print, so you can assess its appearance without moisture or temporary creases affecting the result.

Contact Mobile Light Box to discuss replacement SEG fabric graphics.

Plan your next display refresh

Make fabric care part of your display planning, not a last-minute task before an event. Keep these cleaning instructions for SEG fabric prints with your display notes so the same gentle method is used each time.

If a graphic no longer suits your campaign, we offer replacement SEG fabric graphics. For a broader refresh, we also offer Tradeshow Booth Kits, Banners, and Display Rentals. Choose the option that fits your event and the display components you already have.

A clear plan for your graphic and display makes the next event easier to prepare for.

Frequently Asked Questions

Can I use a tumble dryer for my stretch fabric graphics?

It depends on the print. Dye-sublimated SEG fabric can be tumble dried on low heat using a delicate setting. UV printed SEG fabric cannot be machine washed, so let it air-dry after spot cleaning. Wait until it is fully dry before packing or reinstalling it.

Do I need to remove the silicone edge before washing?

No. Keep the sewn silicone edge attached while cleaning. The strip is stitched to the graphic and fits into the frame’s channel, so pulling or handling it separately can strain the stitching. After cleaning, make sure the edge lies flat and the stitching looks intact before reinstalling the print.

How do I remove heavy grease or oil stains from an exhibition graphic?

Blot grease with a clean microfiber cloth; don’t rub, since friction can spread the mark or work it deeper into the fabric. If residue remains, dab gently with cool water and mild, non-bleach detergent on a soft cloth. Test the cleaner on a hidden area first, then air-dry the graphic fully.

What steps can I take to avoid getting it dirty or stained?

Wear clean gloves when handling the graphic, and keep it off dusty floors during setup. If you need to spread it out, use a clean protective surface. Remove loose dust before it settles into the fabric, and store the dry print separately from display parts to help prevent transfer marks.

How do you clean an SEG fabric print without damaging it?

Use a soft cloth or sponge, cool water, and mild, non-bleach detergent. Dab the affected area gently instead of scrubbing, and avoid harsh chemicals. For example, clean a small smudge with a lightly dampened sponge, then let the fabric air-dry fully before reinstalling it on the frame.

Article by

Borja Kaiser

Borja Kaiser is co-founder of Mobile Light Box US, a family-owned company in Greenacres, Florida. He helps exhibitors, retailers, and event teams choose, set up, and maintain modular SEG light boxes, and handles sales and support for customers across the U.S.